Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Remove the rear door sill trim plate. Refer to Rear Side Door Sill Trim Plate Replacement.
2. Disconnect the rear seat belt. Refer to Rear Seat Belt Retractor Replacement.
3. Remove the rear body side upper trim. Refer to Body Side Rear Upper Garnish Molding Replacement.

1

Panel Assembly, Body Side Lower Trim

Tip

1. Disconnect the accessory power outlet connector.
2. Pull the seat belt through the trim panel.

2

Retainer, Body Side Lower Trim Panel (Qty: 10)