Caution: Refer to Bleed Procedure Caution in the Preface section.

Caution: Refer to Brake Dust Caution in the Preface section.

Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1

Brake Hose Bolt

Tighten
40 N·m (30 lb ft)

2

Brake Hose Washer (Qty: 2)

Tip
Install the new brake hose bolt washers. Do not reuse the brake hose bolt washers.

3

Rear Brake Hose

Tip
Cap or plug the brake hose to prevent fluid loss and contamination for the brake system.

4

Brake Caliper Bolt (Qty: 2)

Tip
If removing the brake caliper to service the brake system, note that the rear or trailing slide bolt for the brake caliper bolt has an O-ring and is a smaller size bolt. DO NOT interchange the front or rear slide bolts.

Tighten
36 N·m (27 lb ft)

5

Rear Brake Caliper

Tip
Bleed the brake system anytime the system is opened for repairs. Refer to Hydraulic Brake System Bleeding .