GM Service Manual Online
For 1990-2009 cars only

This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits refer to Data Link Communications Description and Operation.

Control Module

Data Link Type

Diagnostic Procedure

Schematic Reference: Data Communication Schematics

Body Control Module (BCM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Digital Radio Receiver (DRR)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Electronic Brake Control Module (EBCM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Engine / Powertrain Control Module (ECM/PCM)

    • High Speed GMLAN
    • Class 2

Scan Tool Does Not Communicate with High Speed GMLAN Device

Scan Tool Does Not Communicate with Class 2 Device

Fuel System Control Module (FSCM)

High Speed GMLAN

Scan Tool Does Not Communicate with High Speed GMLAN Device

Inflatable Restraint Sensing and Diagnostic Module (SDM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Instrument Panel Cluster (IPC)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Radio

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Rear View Camera

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Regulated Voltage Control Module (battery current sensor)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Theft Deterrent Module (TDM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Transfer Case Control Module (TCCM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Transmission Control Module (TCM)

High Speed GMLAN

Scan Tool Does Not Communicate with Class 2 Device

Vehicle Communication Interface Module (OnStar® VCIM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device