GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure

    Object Number: 1897775 Size: SH
  1. Remove the generator. Refer to Generator Replacement .
  2. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  3. Remove the engine wiring harness bracket bolt (4).
  4. Reposition the engine wiring harness bracket out of the way.

    5. Object Number: 847280 Size: SH
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket from the vehicle.
  7. Transfer any parts as needed.

Installation Procedure

    Object Number: 847280 Size: SH
  1. Position the generator bracket in the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the generator bracket bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).


    Object Number: 1897775 Size: SH
  3. Position the engine wiring harness bracket to the generator bracket.
  4. Install the engine wiring harness bracket bolt (4).

    5. Tighten
    Tighten the bolt to 40 N·m (29.5 lb ft).

  5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  6. Install the generator. Refer to Generator Replacement .