GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Off Road Lamp Bulb Replacement

Removal Procedure

    Object Number: 1609366 Size: SH
  1. Remove the 6 fastener covers by inserting a flat-bladed tool into the slot on the passengers side of each cover and gently lifting upward.
  2. Using a T25 Torx driver, loosen the six bolts (1) under the fastener covers.
  3. Rotate the lightbar rearward so that the light bar is laying upside down on the roof.
  4. Remove the bulb socket from the lamp assembly by rotating ¼ turn counterclockwise.
  5. Pull the bulb outward from the lamp socket.
  6. Replace the bulb.

Installation Procedure
  1. Install the bulb socket into the lamp assembly by rotating ¼ turn clockwise.
  2. Rotate the light bar to the correct orientation.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fasteners.

    4. Tighten
    Tighten the fasteners to 4.5 N·m (30 lb in).

  4. Install the 6 fastener covers by aligning the tab to the drivers side and gently pressing inward into place.