Transfer Case Speed Sensor Replacement. HUMMER H3 2008

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Transfer Case Speed Sensor Replacement

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
1	Sensor, Speed Tip Disconnect the electrical connector. Tighten 17 N·m (13 lb ft)

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Remove the transfer case shield. Refer to Transfer Case Shield Replacement .

Sensor, Speed

Tip
Disconnect the electrical connector.

Tighten
17 N·m (13 lb ft)