GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure

    Object Number: 1560102 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the evaporative emission (EVAP) canister vent solenoid valve electrical connector (1).

    3. Object Number: 1560077 Size: SH
  3. Disconnect the fuel fill pipe vapor line quick connect (1) from the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .

    4. Object Number: 1564240 Size: SH
  4. Disconnect the EVAP canister vent solenoid valve quick connect from the EVAP canister . Refer to Plastic Collar Quick Connect Fitting Service .
  5. Disengage the bracket retaining tab and remove the EVAP canister vent solenoid valve (1).

Installation Procedure

    Object Number: 1564240 Size: SH
  1. Engage the bracket retaining tab and install the EVAP canister vent solenoid valve (1).
  2. Connect the EVAP canister vent solenoid valve quick connect to the EVAP canister . Refer to Plastic Collar Quick Connect Fitting Service .

    3. Object Number: 1560077 Size: SH
  3. Connect the fuel fill pipe vapor line quick connect (1) to the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .

    4. Object Number: 1560102 Size: SH
  4. Connect the EVAP canister vent solenoid valve electrical connector (1).
  5. Lower the vehicle.