GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver or Passenger Seat Cushion Heater Replacement

Object Number: 1552290 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat back recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
  3. Remove the front seat trim panels. Refer to Front Seat Trim Panel Replacement .

1

Seat Cushion Cover

Procedure

  1. Disconnect the seat cover J-channel from the seat cushion frame.
  2. Remove the hog rings that secure the pad to the cushion cover.

2

Seat Cushion Heater

Tip

    • On the driver seat peel the heater from the seat cushion and disconnect the electrical connector.
    • On the passenger seat the heater must be replaced as a kit with the passenger presence system.

3

Seat Cushion Pad

Tip
Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .