Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the air inlet panel. Refer to Air Inlet Grille Panel Replacement.
2. Disconnect the wiper motor electrical connector.

1

Bolts, Windshield Wiper Transmission Grommet (Qty: 2)

Tighten
10 N·m (89 lb in)

2

Module, Windshield Washer (Qty: 1)

Tip
Rotate module assembly forward to remove from cowl panel.