GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2008 🢒 H3 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 Transmission Fluid Cooler Hose/Pipe Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the transmission fluid cooler lines from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  3. Remove the transmission fluid cooler lines from the retainer located on the radiator.

    4. Object Number: 1207762 Size: SH
  4. Remove the transmission fluid cooler lines from the retainer located on the right side of the engine.
  5. Support the transmission with a transmission jack.
  6. Remove the transmission support. Refer to Transmission Support Crossmember Replacement .
  7. Remove the front exhaust pipe assembly. Refer to Catalytic Converter Replacement .
  8. Carefully lower the transmission to gain access to the transmission fluid cooler line fittings.
  9. Disconnect the transmission fluid cooler lines from the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  10. Remove the transmission fluid cooler lines from the vehicle.

Installation Procedure
  1. Install the transmission fluid cooler lines to the vehicle.
  2. Install the transmission fluid cooler lines to the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .

    3. Notice: Ensure that the cooler line being installed has a plastic cap on each end that connects to a quick connect fitting. If no plastic cap exists, or the plastic cap is damaged, obtain a new plastic cap and position on to the cooler line prior to the cooler line installation.


    Object Number: 1207762 Size: SH
  3. Raise the transmission into position.
  4. Install the front exhaust pipe assembly. Refer to Catalytic Converter Replacement .
  5. Install the transmission support. Refer to Transmission Support Crossmember Replacement .
  6. Remove the transmission jack.
  7. Install the clip (2) that holds the transmission fluid cooler lines together.
  8. Install the transmission fluid cooler lines to the right side of the engine.
  9. Install the transmission fluid cooler line to the retainer located on the radiator.
  10. Install the transmission fluid cooler lines to the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  11. Lower the vehicle.
  12. Fill the transmission to the proper level with DEXRON® III transmission fluid. Refer to Transmission Fluid Check .