Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Endgate Emblem (Qty: 1)

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new nameplate.
3. Ensure full adhesion is made once the nameplate has been installed.

Tip
Clean and dry thoroughly where the emblem will be installed.

1

Endgate Nameplate (ALPHA)

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the endgate, wipe the surface dry with a clean lint-free towel prior to installing new nameplate.
3. Close the endgate prior to installation.
4. Peel the liner from the nameplate.
5. Ensure full adhesion is made once the nameplate has been installed.

Tip
Clean and dry thoroughly where the nameplate will be installed.