Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the front disc brake rotor. Refer to Front Brake Rotor Replacement .

1

Wheel Speed Sensor Electrical Connector

Procedure

Disconnect the electrical connector and release the clip from the vehicle body.

2

Wheel Speed Sensor Wiring Harness Retaining Clip

3

Wheel Speed Sensor Harness Clip Bolt (if equipped)

Notice: Refer to Fastener Notice in the Preface section.

Tip
If equipped with a wheel speed sensor wire harness clip, release the clip from the upper control arm.

Tighten
9 N·m (80 lb in)

4

Wheel Speed Sensor Wiring Harness Retaining Clip

5

Wheel Speed Sensor Mounting Bolt

Tighten
18 N·m (13 lb ft)

6

Wheel Speed Sensor