Important: The following steps must be completed before using the symptom tables.
- Perform the
Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:
| • | The control modules can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with the system functions. Refer to the following system descriptions:
Visual/Physical Inspection
| • | Inspect the washer fluid reservoir for the proper fluid level and condition. |
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
| • | Inspect for aftermarket devices which could affect the operation of the Windshield Wiper/Washer System. |
Intermittent
| • | If the wipers operate at low speed for approximately 3 seconds and then stop, the wiper motor park switch, or its signal circuit, may be malfunctioning. |
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
