The Remote Keyless Entry (RKE) transmitter functions work up to 30 feet (9 m) away from the vehicle.
There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System .
LOCK: Press to lock all the doors. The parking lamps may flash and the horn may chirp.
If a door is open or ajar when LOCK is pressed, the doors lock, but the theft-deterrent system does not arm until the open door is closed.
Pressing LOCK may arm the content theft-deterrent system. See Content Theft-Deterrent for additional information.
UNLOCK: Press to unlock only the driver's door. The interior lamps come on, the parking lamps may flash, and the horn may sound.Press UNLOCK again within three seconds to unlock all the doors.
Pressing UNLOCK may disarm the content theft-deterrent system. See Content Theft-Deterrent for additional information.
Different feedback choices can be programmed through the Driver Information Center (DIC). See "Remote Keyless Entry Feedback" under DIC Operation and Displays .
(Panic): Press to activate the alarm. The horn sounds and the headlamps and taillamps flash for up to 30 seconds. To turn the alarm off press again, start the vehicle or wait 30 seconds.Programming Transmitters to the Vehicle
Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/retailer. When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed. Any lost or stolen transmitters will no longer work once the new transmitter is programmed. Each vehicle can have up to four transmitters programmed to it.
Battery Replacement
The battery in the transmitter is weak and should be changed if it does not work at the normal range in any location.
Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter.
To replace the battery:
- Separate the transmitter with a flat, thin object inserted into the notch on the side.
- Remove the old battery. Do not use a metal object.
- Insert the new battery. Replace with a CR2032 or equivalent battery.
- Snap the transmitter back together.
