Preliminary Procedures

1. Drain the cooling system. Refer to Cooling System Draining and Filling.
2. Remove the generator. Refer to Generator Replacement.
3. Using J 38185 , reposition the hose clamp at the heater outlet fitting.
4. Remove the heater inlet hose from the heater outlet fitting.
5. Remove the heater inlet hose from the heater core.

1

Transmission Housing Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Heater Inlet Hose

Tip
Check for coolant leak around the heater inlet hose connections.

Preliminary Procedure

1. Drain the cooling system. Refer to Cooling System Draining and Filling.
2. Remove the battery. Refer to Battery Replacement.
3. Use J 38185 to release the radiator hose clamp and J 43181 to release the quick connect.

1

Heater Inlet Hose Clamp

2

Heater Inlet Hose Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (7 lb ft)

3

Heater Inlet Hose Quick Connect Fitting

4

Heater Inlet Hose Assembly