Preliminary Procedures

Remove the clutch master cylinder push rod from the clutch pedal assembly.

1

Clutch Pedal Assembly Nuts (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
20 N·m (15 lb ft)

2

Clutch Pedal Assembly

Procedures

1. Disconnect the clutch pedal position switch electrical connector.

Warning: Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the vehicle is in gear and the starter motor is accidentally engaged.

2. Perform the clutch pedal position sensor learn procedure. Refer to Clutch Pedal Position Sensor Learn

.