Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the front disc brake rotor. Refer to Front Brake Rotor Replacement.

1

Wheel Speed Sensor Electrical Connector

Procedure

Disconnect the electrical connector and release the clip from the vehicle body.

2

Wheel Speed Sensor Wiring Harness Retaining Clip

3

Wheel Speed Sensor Harness Clip Bolt (if equipped)

Caution: Refer to Fastener Caution in the Preface section.

Tip
If equipped with a wheel speed sensor wire harness clip, release the clip from the upper control arm.

Tighten
9 N·m (80 lb in)

4

Wheel Speed Sensor Wiring Harness Retaining Clip

5

Wheel Speed Sensor Mounting Bolt

Tighten
18 N·m (13 lb ft)

6

Wheel Speed Sensor