| Table 1: | Indicators |
| Table 2: | DIC Warning Messages |
Symbol | Reference | ||||
|---|---|---|---|---|---|
| |||||
| Air Bag: SIR System Description and Operation | ||||
(Canada) 
BRAKE (U.S.) | |||||
| |||||
(Canada) CRUISE (U.S.) | |||||
| Fasten Safety Belt: Seat Belt System Description and Operation | ||||
| Fasten Passenger Seat Belts: Seat Belt System Description and Operation | ||||
| High Beam: Exterior Lighting Systems Description and Operation | ||||
| The IPC displays this indicator when the ECM detects a low engine oil pressure condition. The IPC receives a serial data message from the BCM requesting display of the indicator. | ||||
| Passenger Air Bag Off: SIR System Description and Operation | ||||
| Passenger Air Bag On: SIR System Description and Operation | ||||
(Canada) SECURITY (U.S.) | SECURITY: Content Theft Deterrent (CTD) Description and Operation | ||||
| Stability Caution: ABS Description and Operation | ||||
(Canada) SERVICE ENGINE SOON (U.S.) |
| ||||
| Tire Pressure Monitor: Tire Pressure Monitor Description and Operation | ||||
| Turn Signals: Exterior Lighting Systems Description and Operation | ||||
| The IPC displays this indicator when the ECM determines that the vehicle should be shifted to the next higher gear. |
Message | Reference | ||||
|---|---|---|---|---|---|
ABS FAULT | |||||
BATTERY | |||||
BRAKES | |||||
CARGO LAMP | |||||
CHANGE OIL | The IPC displays this message when the ECM determines that the engine oil should be changed. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting . | ||||
FLUID | |||||
FUEL CAP | Fuel System Description for the 3.7L engine or Fuel System Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine | ||||
DOORS | |||||
DOME LAMP | |||||
ENG HOT | |||||
LOW FUEL | The IPC displays this message in the DIC when the IPC detects that the fuel level is less than a pre-determined value. | ||||
LOW TRAC | |||||
LOW TIRE | |||||
MAP LAMP | |||||
OIL | The IPC displays this message in the DIC when the ECM detects a low engine oil pressure condition. The IPC receives a serial data message from the BCM requesting display of the message. | ||||
OIL LIFE | The IPC displays the engine oil life message when the ECM determines that the engine oil should be changed. The IPC receives a serial data message from the ECM indicating the remaining oil life percent. | ||||
PARK BRAKE | |||||
REDUCED POWER |
| ||||
SERV 4WD | |||||
SERV VEH |
| ||||
SERV TPM | |||||
SERVICE CHARGE SYS | |||||
SERVICE STAB SYS | |||||
STAB SYS OFF | |||||
TRACTION FAULT | |||||
TRAC OFF |
