Rear License Plate Lamp Replacement. HUMMER H3 2009

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2009 🢒 H3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear License Plate Lamp Replacement

Rear License Plate Lamp Replacement with BRM and RHD

Callout	Component Name
1	Rear License Plate Lamp Assembly Tip Depress the very small lamp tabs inboard towards the outboard side of the vehicle in order to release the lamps from the impact bar bumper cover.
2	License Plate Lamp Socket Tip Twist the lamp socket electrical connector counter-clockwise and remove from the lens housing.
3	License Plate Lamp Bulb

Callout

Component Name

Rear License Plate Lamp Assembly

Tip
Depress the very small lamp tabs inboard towards the outboard side of the vehicle in order to release the lamps from the impact bar bumper cover.

License Plate Lamp Socket

Tip
Twist the lamp socket electrical connector counter-clockwise and remove from the lens housing.

License Plate Lamp Bulb

Rear License Plate Lamp Replacement Base

Callout	Component Name
1	License Plate Lamp Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	License Plate Lamp Assembly Connector (Qty: 1) Tip Pull electrical harness slightly rearward to disconnect from socket.
3	Lamp Assembly - Rear License Plate (Qty: 1) Tip Hold socket and rotate lens counterclockwise to remove from socket.
4	Rear License Plate Lamp Bulb (Qty: 1) Tip Hold socket and pull bulb straight outward.