GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2009 🢒 H3 🢒 Body Systems 🢒 Lighting 🢒 Roof Clearance Lamp Bulb Replacement

Removal Procedure

    Object Number: 1609359 Size: SH
  1. Remove the air inlet cover (1) by pulling up to release the clips.
  2. Open the front doors.
  3. Remove A-pillar trim by first peeling back the weatherstrip to expose the 2 screws.
  4. Use a Phillips head screwdriver, to remove the screws.
  5. Pull up on the lower end of the A-pillar trim to unsnap the clips (1).
  6. Unhook the A-pillars from the front end of the luggage rack/siderail.
  7. Remove bulb socket from the lamp assembly by rotating ¼ turn counterclockwise.
  8. Pull the bulb out of the socket.
  9. Replace the bulb.

Installation Procedure
  1. Install the lamp socket into the lamp assembly by rotating the lamp socket ¼ turn clockwise.

    2. Object Number: 1609360 Size: SH
  2. Install the A-pillar trim by hooking the rear edge under the tab (2) at the luggage rack/siderail and pressing the clips (1) into place.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 2 screws (4) behind weatherstrip.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Reposition the weatherstrip (3).