Preliminary Procedure

Open the endgate in order to access the rear taillamp assembly screws.

1

Tail Lamp Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Tail Lamp Assembly

Tip
Pull lamp housing outward in order to release the exterior side pin retainers.

3

Tail Lamp Electrical Harness

Warning: Refer to Halogen Bulb Warning in the Preface section.

Tip
Disconnect all three bulb sockets from the tail lamp housing.

Preliminary Procedure

Open the endgate in order to access the left rear tail lamp assembly screws.

1

Tail Lamp Housing Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Pull lamp housing outward in order to release the exterior side pin retainers.

Tighten
3 N·m (26 lb in)

2

Tail Lamp Assembly

Tip
Disconnect the bulb sockets from the lamp housing by rotating counterclockwise.

3

Tail Lamp Electrical Connector