GM Service Manual Online
For 1990-2009 cars only

Object Number: 1573879  Size: SF

Callout

Component Name

Preliminary Procedure

Remove the front wiper transmission. Refer to Windshield Wiper Transmission Replacement.

1

Transmission to Wiper Motor Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Windshield Wiper Motor

Tip

    • The new wiper motor and crank arm position is pre-set, no crank arm to transmission arm alignment is needed.
    • Use a J 39232 Wiper Transmission Separator or equivalent to remove the transmission linkage from the crank arm.
    • Use a J 39529 Transmission Installer or equivalent to secure the transmission linkage to the wiper motor crank arm.