Preliminary Procedure

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.

1

Windshield Washer Solvent Container Assembly Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Roll the container assembly forward.
2. Disconnect both washer pump electrical connectors.
3. Disconnect both washer pump jumper hoses at the air inlet grille panel connections, if equipped.
4. Contain any lost washer solvent fluid in a clean suitable container.
5. Disconnect and secure the coolant container overflow hose.
6. Transfer all parts as needed.

Tighten
9 N·m (80 lb in)

2

Windshield Washer Solvent Container Assembly

Tip
Refer to Cooling System Draining and Filling for draining and filling the coolant system recovery container.