Warning: Refer to Brake Dust Warning in the Preface section.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.

Note: If removing the brake caliper bracket to access other vehicle components, remove the disc brake caliper, disc brake pads and the caliper bracket as an assembly.

3. Remove the rear disc brake pads. Refer to Rear Disc Brake Pads Replacement.

1

Brake Caliper Bracket Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip

Tighten
135 N·m (100 lb ft)

2

Rear Brake Caliper Bracket

3

Rear Disc Brake Caliper Guide Pin (Qty: 2)

Tip
The disc brake caliper guide pins are not interchangeable. Note the location of the guide pins.

4

Rear Brake Caliper Guide Pin Seal

Tip
The guide pin seal is installed on the lower disc brake caliper guide pin.

5

Rear Brake Caliper Guide Pin Boot (Qty: 2)