Front Floor Upper Console Trim Plate Replacement. HUMMER H3 2009

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2009 🢒 H3 🢒 Transmission 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 Front Floor Upper Console Trim Plate Replacement

Front Floor Upper Console Trim Plate Replacement LHD w/Manual Transmission

Callout	Component Name
Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.
1	Console Upper Trim Plate Tip Shifter bezel and console upper trim plate must be remove as one assembly.
2	Manual Shift Handle Screw Caution: Refer to Fastener Caution in the Preface section. Procedure Lift the console upper trim plate enough to access the shift handle retaining screw. Apply threadlock GM P/N 1234593 (Canadian P/N 10953488) to the shift lever set screw threads before reinstalling. Tighten 25 N·m (18 lb ft)
3	Trim Clip Retainer (Qty: 6)

Callout	Component Name
1	Floor Shift Control Knob Assembly Refer to Floor Shift Control Knob Replacement.
2	Console Upper Trim Plate Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers. Tip Shifter bezel and console upper trim plate must be removed as one assembly.
3	Trim Clip Retainer (Qty: 6)

Callout

Component Name

Floor Shift Control Knob Assembly

Console Upper Trim Plate

Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.

Tip
Shifter bezel and console upper trim plate must be removed as one assembly.

Trim Clip Retainer (Qty: 6)

Callout	Component Name
1	Floor Shift Control Knob Assembly Refer to Floor Shift Control Knob Replacement.
2	Console Upper Trim Plate Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers. Tip Shifter bezel and console upper trim plate must be removed as one assembly.
3	Trim Clip Retainer (Qty: 6)

Callout

Component Name

Floor Shift Control Knob Assembly

Console Upper Trim Plate

Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.

Tip
Shifter bezel and console upper trim plate must be removed as one assembly.

Trim Clip Retainer (Qty: 6)

Callout	Component Name
1	Console Upper Trim Plate Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers. Tip Shifter bezel and console upper trim plate must be remove as one assembly.
2	Manual Shift Handle Screw Caution: Refer to Fastener Caution in the Preface section. Procedure Lift the console upper trim plate enough to access the shift handle retaining screw. Apply threadlock GM P/N 1234593 (Canadian P/N 10953488) to the shift lever set screw threads before reinstalling. Tighten 25 N·m (18 lb ft)
3	Trim Clip Retainer (Qty: 6)

Callout

Component Name

Console Upper Trim Plate

Caution: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.

Tip
Shifter bezel and console upper trim plate must be remove as one assembly.

Manual Shift Handle Screw

Caution: Refer to Fastener Caution in the Preface section.

Lift the console upper trim plate enough to access the shift handle retaining screw.
Apply threadlock GM P/N 1234593 (Canadian P/N 10953488) to the shift lever set screw threads before reinstalling.

Tighten
25 N·m (18 lb ft)

Trim Clip Retainer (Qty: 6)