Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

1

Clips, Integral Retention (Qty: 10)

Tip
Evenly pull the hood air grille panel at the outer edges upward to release the 10 tabs from the hood retention clips.

2

Grille Assembly - Hood Air

1

Hood Air Grille Assembly Retention Clip (Qty: 10)

Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface section.

Procedure

1. Open and support the hood.
2. Release the rear five retention clips.
3. Close the hood.
4. Lift the base of the louver to disengage the front retention clips from the outer hood panel.
5. Ensure the two outer tubular seals, foam blocks and rear sealing strip are in position upon assembly.

2

Hood Air Grille Assembly

Tip
Bent or broken retention clips should be replaced upon assembly.