Rocker Panel Rear Molding Replacement. HUMMER H3 2009

For 1990-2009 cars only

Makes 🢒 HUMMER 🢒 2009 🢒 H3 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rocker Panel Rear Molding Replacement

Rocker Panel Rear Molding Replacement H3T

Callout	Component Name
1	Push Pin (Qty: 2) Tip Release the two push pins from the rocker panel molding bracket.
2	Molding Clip (Qty: 2) Tip Using a suitable trim tool, release the two retainers from the pick up box outer side lower panel.
3	Retainer Tip Release the retainer from the lower rear wheel opening flare.
4	Rocker Panel Rear Molding Tip Upon assembly, align the two stationary pins to the holes in the box outer side and flare, apply palm pressure to the molding in order to position and secure the two clips and the retainer.