Preliminary Procedures

1. Move the window to the full up position and secure in place with tape.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
4. Remove the armrest bracket. Refer to Armrest Bracket Replacement.

1

Rear Side Door Window to Regulator Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window Regulator Bolt (Qty: 3)

Tighten
10 N·m (89 lb in)

3

Rear Side Door Window Regulator Assembly

Procedure

Disconnect the electrical connector.