Windshield Washer Solvent Container and Pump Replacement Typical

Caution: Refer to Battery Disconnect Caution in the Preface section.

1. Disconnect the negative battery cable.
2. Remove the front left wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the screws and the front wheel well splash shield.



4. Disconnect the washer hoses from the reservoir.
5. Disconnect the reservoir pump electrical connectors.
6. Remove the bolts, the nuts and the reservoir.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the reservoir with the nuts and the bolts.

Tighten
Tighten the washer fluid reservoir nuts and bolts to 9 N·m (80 lb in).

2. Connect the reservoir pump electrical connectors.
3. Connect the washer hoses to the reservoir.
4. Install the front wheel well splash shield with the screws.

Tighten
Tighten the front wheel well splash shield screws to 1.5 N·m (13 lb in).

5. Install the front left wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
6. Connect the negative battery cable.