GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 Barina 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Rear Side Door Window Replacement

Removal Procedure

    Object Number: 1248271 Size: SH
  1. Remove the rear door trim panel. Refer to Rear Door Trim Panel Replacement .
  2. Remove the outside channel molding. Refer to Rear Side Door Window Channel Replacement .
  3. Remove the interior rear door garnish molding.
  4. Remove the screws and the exterior rear door garnish molding.

    5. Object Number: 1248272 Size: SH
  5. Remove the door seal trim. Refer to Door Water Deflector Replacement .
  6. Remove the screws that secure the glass to the window regulator.

    7. Object Number: 1248273 Size: SH
  7. Remove the bolts and the guide rail.
  8. Remove the glass from the door.

Installation Procedure

    Object Number: 1248273 Size: SH
  1. Install the glass in the door.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the guide rail and the bolts.

    3. Tighten
    Tighten the guide rail bolts to 7 N·m (62 lb in).


    Object Number: 1248272 Size: SH
  3. Position the glass within the window regulator.
  4. Install the glass screws.

    5. Tighten
    Tighten the door glass screws to 7 N·m (62 lb in).


    Object Number: 1248271 Size: SH
  5. Install the door seal trim. Refer to Door Water Deflector Replacement .
  6. Install the exterior rear door garnish molding with the screws.

    7. Tighten
    Tighten the exterior rear door garnish molding screws to 1.5 N·m (13 lb in).

  7. Install the interior rear door garnish molding.
  8. Install the outside channel molding. Refer to Rear Side Door Window Channel Replacement .
  9. Install the rear door trim panel. Refer to Rear Door Trim Panel Replacement .