For 1990-2009 cars only
Removal Procedure
- Raise and support the hood.
- Remove the washer hose.
- Mark the position of the hinge to the hood in order to aid in alignment during installation.
- Remove the bolts retaining the hood to both hinges.
- With the aid of another technician, remove the hood from the hinges.
Important: Install protective coverings over the fenders and the windshield in order to prevent damage to the paint, the glass, and the moldings when removing and installing the hood.
Installation Procedure
- With the aid of another technician, position the hood in the location marked during removal.
- Install the 2 bolts securing the hood to each hinge.
- Install the washer hose.
- Inspect the hood for proper alignment.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the hood-to-hinge bolts to 20 N·m (15 lb ft).
