Rear Door Trim Panel Replacement Notchback

1. Lower the rear window.
2. Remove the rear window regulator handle. Refer to Door Window Regulator Handle Replacement.
3. Remove the door pull screw.
4. Remove the inside door handle.



5. Remove the rear door interior garnish molding.
6. Remove the screws at the base of the trim panel.
7. Pry off the trim panel.

1. Install the trim panel.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screws at the base of the trim panel and tighten to 3.5 N·m (31 lb in).



3. Install the rear door interior garnish molding.
4. Install the inside door handle.
5. Install the door pull screw and tighten to 3.5 N·m (31 lb in).
6. Install the rear window regulator handle. Refer to Door Window Regulator Handle Replacement.
7. Raise the window.

Rear Door Trim Panel Replacement Hatchback

Special Tools

J 21104-B (KM 475-B) Weatherstrip Remover Universal

1. Lower the rear window.
2. Remove the rear window regulator handle. Refer to Door Window Regulator Handle Replacement.
3. Remove the door pull screw.
4. Remove the inside door handle.



5. Remove the rear door interior garnish molding.
6. Remove the screws at the base of the trim panel.
7. Pry off the trim panel using the trim remover J 21104-B  (1).

1. Install the trim panel.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screws at the base of the trim panel and tighten to 3.5 N·m (31 lb in).



3. Install the rear door interior garnish molding.
4. Install the inside door handle.
5. Install the door pull screw and tighten to 3.5 N·m (31 lb in).
6. Install the rear window regulator handle. Refer to Door Window Regulator Handle Replacement.
7. Raise the window.