GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Drive Belt Tensioner Replacement

Removal Procedure

    Object Number: 2049041 Size: SH

    Note: To remove the power steering pump belt, do remove the accessory belt in advance.

  1. Rotate the tensioner star-nut (1 and remove the accessory belt.
  2. Remove the power steering belt. Refer to Power Steering Pump Replacement.

    3. Object Number: 2049353 Size: SH
  3. Remove the accessory belt tensioner (1.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2049353 Size: SH
  1. Install the accessory belt tensioner (1) and tighten to 50 N·m (36.8 lb ft).

    2. Object Number: 2049041 Size: SH
  2. Install the power steering belt. Refer to Power Steering Pump Replacement.
  3. Rotate the tensioner star-nut (1) and install the accessory belt.
  4. Install the engine front shield at the position of right front wheel.