GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Engine 🢒 Engine Mechanical - 2.0L (Diesel) 🢒 Crankshaft Rear Oil Seal Replacement

Special Tools

    • KM-470-B Angular Torque Gage
    • EN-48252 Crankshaft Oil Seal Installer

Removal Procedure
  1. Remove the engine assembly. Engine ReplacementRefer to
  2. Seperate the engine from the transmission.

    3. Object Number: 1822647 Size: SH
  3. Remove the flywheel or flexible plate bolts.
  4. Remove the flywheel or flexible plate.
  5. Remove the rear main seal.

Installation Procedure

    Object Number: 1822665 Size: SH
  1. Install the crankshaft rear rear main seal with new one using EN-48251 .

    2. Object Number: 1822647 Size: SH
  2. Install the flywheel or flexible plate.

    3. Tighten
    Tighten the flywheel or flexible plate tightening bolts to 105 N·m (77.4 lb ft).

  3. Install the engine to the transmission.
  4. Install the engine assembly. Refer to Engine Replacement.