GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Air Cleaner Assembly Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1795318 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the mass air flow (MAF) sensor connector.
  3. Loosen the clamp and disconnect the flexible air intake duct from the MAF sensor assembly.

    4. Object Number: 1758476 Size: SH
  4. Remove the air cleaner housing bolts.
  5. Unclip the housing from the ball stud and then remove the air cleaner assembly.

Installation Procedure

    Object Number: 1758476 Size: SH
  1. Install the air cleaner lower housing to the ball stud.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the air cleaner housing bolts.

    3. Tighten
    Tighten the air cleaner housing attaching bolt to 6 N·m (53 lb in).

  3. Install the air intake duct assembly.
  4. Tighten the loosened clamps.