GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Body Systems 🢒 Vehicle Access 🢒 Liftgate Outside Handle Replacement

Liftgate Outside Handle Replacement C100/Long Body

Removal Procedure

    Object Number: 1758251 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement .
  3. Disconnect the electrical connector.
  4. Remove the nuts and the liftgate outside handle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1758252 Size: SH
  1. Install the liftgate outside handle with the nuts.

    2. Tighten
    Tighten the liftgate outside handle nut to 3 N·m (27 lb in).

  2. Connect the electrical connector.
  3. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Liftgate Outside Handle Replacement C105/Short Body

Removal Procedure

    Object Number: 1829912 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement .
  3. Disconnect the electrical connector.
  4. Remove the nuts and the liftgate outside handle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1829912 Size: SH
  1. Install the liftgate outside handle with the nuts.

    2. Tighten
    Tighten the liftgate outside handle nut to 3 N·m (27 lb in).

  2. Connect the electrical connector.
  3. Install the liftgate lower trim. Refer to Liftgate Trim Panel Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .