GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Side Window Rear Garnish Molding Replacement

Body Side Window Rear Garnish Molding Replacement C 100/Long Body

Removal Procedure

    Object Number: 1758275 Size: SH
  1. Remove the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear .
  2. Remove the screws and the quarter window garnish molding.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1758275 Size: SH
  1. Install the quarter window garnish molding with the screws.

    2. Tighten
    Tighten the quarter window garnish molding screws to 2 N·m (18 lb in).

  2. Install the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear .

Body Side Window Rear Garnish Molding Replacement C 105/Short Body

Removal Procedure

    Object Number: 1829829 Size: SH
  1. Remove the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear .
  2. Remove the screws and the quarter window garnish molding.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1829829 Size: SH
  1. Install the quarter window garnish molding with the screws.

    2. Tighten
    Tighten the quarter window garnish molding screws to 2 N·m (18 lb in).

  2. Install the rear seat lower belts. Refer to Seat Belt Retractor Replacement - No. 1 Rear or Seat Belt Retractor Replacement - No. 2 Rear .