GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 General Information 🢒 General Information 🢒 Engine Shield Replacement

Removal Procedure

    Object Number: 1819597 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the bolts and the engine shield.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1819597 Size: SH
  1. Install the engine shield with the bolts.

    2. Tighten
    Tighten the engine shield bolts to 10 N·m (89 lb in).

  2. Lower the vehicle.