GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vacuum Pump Assembly Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1820582 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the engine cover. Refer to Engine Cover Replacement.
  3. Remove the junction block bolts. Refer to Fuel Return Pipe Replacement.
  4. Remove the beauty cover bracket.

    5. Object Number: 1820583 Size: SH
  5. Remove the engine wiring harness bracket.
  6. Disconnect the EGR and brake booster vacuum hoses.

    7. Object Number: 1820584 Size: SH
  7. Remove the vacuum pump.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1820584 Size: SH
  1. Install the vacuum pump and tighten the tightening bolts to 12 N·m (8.9 lb ft).

    2. Object Number: 1820583 Size: SH
  2. Install the engine wiring harness bracket.
  3. Connect the EGR and brake booster vacuum hoses. Tighten the engine wiring harness bracket nuts to 20 N·m (14.8 lb ft).

    4. Object Number: 1820582 Size: SH
  4. Install the engine cover and bracket. Tighten the beauty cover bracket bolts to 11 N·m (97.4 lb in).
  5. Install the junction block bolts. Refer to Fuel Return Pipe Replacement.
  6. Connect the negative battery cable.