Relay Replacement Within an Electrical Center
Special Tools
J-43244 Relay Puller Pliers
Removal Procedure
- Remove the electrical center cover.
- Locate the relay. Refer to
Electrical Center Identification Views to locate the electrical center where the relay exists.
Note:
• | Always note the orientation of the relay. |
• | Ensure that the electrical center is secure, as not to put added stress on the wires or terminals. |
- Using the
J 43244 (1) position the tool on opposing corners of the relay (2).
Caution: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.
- Remove the relay (2) from the electrical center.
Installation Procedure
- Install the relay (2) in the same position as removed.
- Install the electrical center cover.