GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Suspension 🢒 Rear Suspension 🢒 Rear Suspension Link Replacement - Toe Link

Removal Procedure

    Object Number: 929839 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the toe link to knuckle nut and bolt.

    3. Object Number: 930283 Size: SH
  3. Remove the toe link to support nut and bolt.
  4. Remove the toe link from the vehicle.

Installation Procedure

    Object Number: 930283 Size: SH
  1. Install the toe link to the support assembly.

    2. Note: 

       • Install the bolt with the head towards the front of the vehicle.
       • Position the cam nut in same position as in the upper control arm.

  2. Install the toe link to support nut and bolt.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 929839 Size: SH
  3. Install the toe link to the knuckle and tighten to 160 N·m (118 lb ft).
  4. Tighten the toe link to support bolt and tighten to 160 N·m (118 lb ft).
  5. Lower the vehicle.
  6. Check the rear alignment. Refer to Wheel Alignment Measurement.