GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1768942 Size: SH
  2. Remove the stabilizer shaft clamp bolts.
  3. Remove the insulators from the stabilizer shaft.

Installation Procedure


    Object Number: 1768942 Size: SH
  1. Install the insulators the stabilizer shaft.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer shaft clamp bolts and tighten to 70 N·m (52 lb ft).
  3. Lower the vehicle.