GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Strut Assembly Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1768697 Size: SH
  2. Remove the cap and the nuts from the strut upper area.
  3. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

    4. Object Number: 1768687 Size: SH
  4. Remove the brake hose bracket bolt.
  5. Remove the stabilizer link to strut upper nut.
  6. Remove the strut bracket to knuckle bolts and nuts.
  7. Remove the strut assembly.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1768687 Size: SH
  1. Install the strut assembly to the knuckle with the bolts and nuts and tighten to 180 N·m (133 lb ft).
  2. Install the brake hose bracket to the strut with the bolt and tighten to 15 N·m (11 lb ft).

    3. Object Number: 1768697 Size: SH
  3. Install the nuts to the strut and tighten to 30 N·m (22 lb ft).
  4. Install the cap to the top of the strut.
  5. Install the stabilizer link to strut upper nut and tighten to 65 N·m (48 lb ft).
  6. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  7. Measure the wheel alignment. Adjust the wheel alignment if necessary. Refer to Wheel Alignment Measurement.
  8. Lower the vehicle.