GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 929945 Size: SH
  2. Remove the stabilizer bar clamp to cradle bolts.
  3. Remove the stabilizer bar clamps and bushings from the stabilizer bar.

Installation Procedure

    Object Number: 929945 Size: SH
  1. Install the stabilizer bar clamps and bushings to the stabilizer bar.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer bar clamp to cradle bolts and tighten to 50 N·m (37 lb ft).
  3. Lower the vehicle.