GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Body Systems 🢒 Vehicle Access 🢒 Liftgate Outside Handle Replacement

Liftgate Outside Handle Replacement C100/Long Body

Removal Procedure

    Object Number: 1758251 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement.
  3. Disconnect the electrical connector.
  4. Remove the nuts and the liftgate outside handle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1758252 Size: SH
  1. Install the liftgate outside handle with the nuts and tighten to 3 N·m (27 lb in).
  2. Connect the electrical connector.
  3. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

Liftgate Outside Handle Replacement C105/Short Body

Removal Procedure

    Object Number: 1829912 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement.
  3. Disconnect the electrical connector.
  4. Remove the nuts and the liftgate outside handle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1829912 Size: SH
  1. Install the liftgate outside handle with the nuts and tighten to 3 N·m (27 lb in).
  2. Connect the electrical connector.
  3. Install the liftgate lower trim. Refer to Liftgate Trim Panel Replacement.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.