Preliminary Procedure

Remove the windshield wiper transmission frame assembly. Refer to Windshield Wiper Transmission Replacement.

1

Windshield Wiper Motor Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

2

Windshield Wiper Motor

Procedure

1. Using a J 39232 Wiper Linkage Separator or similar tool remove the transmission drive links from the wiper motor crank arm ball stud.
2. Using a J 39529 Wiper Linkage Installer or similar tool install the wiper transmission drive links onto the wiper motor crank arm ball stud.

Tip
Apply a small amount of grease to the inner cup on the transmission links to aid in installation.