GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Body Systems 🢒 Wipers and Washers 🢒 Rear Window Wiper Motor Replacement

Removal Procedure

    Object Number: 1759034 Size: SH
  1. Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement.
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement.
  3. Remove the rear wiper motor bolts.
  4. Remove the motor By sliding the pivot shaft out of the rear window grommet.
  5. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1759034 Size: SH
  1. Connect the electrical connector.
  2. Install the rear wiper motor through the rear window grommet.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the wiper motor bolts and tighten to 8 N·m (11 lb ft).
  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement.
  5. Install the rear wiper arm. Refer to Rear Window Wiper Arm Replacement.