Preliminary Procedure

Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .

1

Fluid Level Control Valve

2

Fluid Level Control Valve Gasket

3

Control Valve Body Bolt M6 x 60 (Qty: 9)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Tighten in specified sequence.

Tighten
12 N·m (106 lb in)

4

Control Valve Body Bolt M6 x 53 (Qty: 2)

Tip
Tighten in specified sequence.

Tighten
12 N·m (106 lb in)

5

Control Valve Body Assembly

6

Control Valve Body Spacer Plate Assembly

7

Manual Shaft Detent Spring Bolt M6 x 16

Tip
Tighten in specified sequence.

Tighten
12 N·m (106 lb in)

8

Manual Shaft Detent Lever Spring Assembly

9

1-2-3-4 Clutch Fluid Passage Seal

Tip
Discard the seal. It is not reusable.

10

Low/Reverse Clutch Fluid Passage Seal

Tip
Discard the seal. It is not reusable.