GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Door Replacement

Removal Procedure


    Object Number: 1758308 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the bolt and the door hold-open link from the body.

    3. Object Number: 1758312 Size: SH
  3. With the aid of another technician, remove the door hinge bolts and the rear door.
  4. Disconnect the body-to-door rubber grommet and the electrical connector.

Installation Procedure


    Object Number: 1758312 Size: SH
  1. Connect the electrical connector and the body-to-door rubber grommet.
  2. With the aid of another technician, lightly secure the rear door with the door hinge bolts.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Adjust the door for proper fit and tighten the door hinge-to-body bolts to 27.5 N·m (20 lb ft).

    4. Object Number: 1758308 Size: SH
  4. Install the door hold-open link to the body with the bolts and tighten to 20 N·m (15 lb ft).
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Perform the waterleak test. Refer to Water Hose Test.
  7. Check for windnoise. Refer to Exterior Windnoise.