GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Captiva 🢒 Steering 🢒 Power Steering 🢒 Power Steering Control Module Replacement

Removal Procedure
  1. Disconnect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the driver knee bolster. Refer to Knee Bolster Replacement.
  3. Disconnect the connector of SSPS control module.

    4. Object Number: 1768751 Size: SH
  4. Remove the SSPS control module from the bracket by sliding the control module upward.

    5. Object Number: 1768762 Size: SH
  5. Remove the bracket by removing the bolts, if needed.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1768762 Size: SH
  1. Install the control module bracket and the bolts and tighten to 10 N·m (88.5 lb in).

    2. Object Number: 1768766 Size: SH
  2. Install the SSPS control module to the bracket.
  3. Connect the connector of SSPS control module.
  4. Install the driver knee bolster. Refer to Knee Bolster Replacement.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.